Cisco ASR 1001 Guide d'installation télécharger pdf (Page 41)

11-357

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide

OL-13208-11

Chapter 11 Cisco ASR 1001 Router Overview and Installation

Cisco ASR 1001 Router Power Supply Installation

Figure 11-30 shows the DC power supply with lead wires.

Figure 11-30 DC Power Supply with Lead Wires

Step 7 Insert the exposed wire of one of the ground wire into the terminal block plug. Ensure that you cannot

see any wire lead. Only wires with insulation should extend from the terminal block.

Caution Do not overtorque the terminal block plug captive screws. The recommended maximum torque is from

0.5 Nm (4.425 lbf in.) to 0.6 Nm (5.310 lbf in.).

1 Negative (–) lead wire 3 Ground lead wire

2 Positive (+) lead wire — —

207765

1 2 ... 36 37 38 39 40 41 42 43 44

Pas de commentaire

Cisco ASR 1001 Guide d'installation Page 41