Cisco RSP7000 Manuel d'utilisateur télécharger pdf (Page 5)

cablelength

PA-T3 and PA-2T3 Serial Port Adapters 5

cablelength

To change the length of the cable, use the cablelength interface configuration command. To restore

the default value, use the no form of this command.

cablelength length

no cablelength

Syntax Description

Default

50 feet

Command Mode

Interface configuration

Usage Guidelines

This command first appeared in Cisco IOS Release 11.1 CA.

Example

The following example specifies a cable length of 250 feet:

interface serial 1/0

cablelength 250

length Cable length in the range of 0 to 450 feet. The default is 50 feet.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Pas de commentaire

Cisco RSP7000 Manuel d'utilisateur Page 5