Cisco WS-SVC-IPSEC-1= - IPSec VPN Services Module Informations techniques télécharger pdf (Page 52)

IPSec VPN Acceleration Services Module Installation and Configuration Note

78-14459-03 Rev C0

Configuring a VPN Using the VPN Module

Figure 12 Trunk Port Conﬁguration Example

To configure a trunk port connection to the WAN router, follow these steps:

Step 1 Create an IKE policy, if necessary.

Step 2 Create a preshared key entry, if necessary.

Step 3 Create an ACL.

Step 4 Create a crypto map.

Step 5 From privileged EXEC mode, add an inside interface VLAN (VLAN 171) and an outside trunk port

VLAN (VLAN 271) to the VLAN database as follows:

a. Router# config t

Enter configuration commands, one per line. End with CNTL/Z.

b. Router(config)# vlan 171

Router(config-vlan)# name inside_interface_vlan

Router(config-vlan)# exit

Router(config)#

c. Router(config)# vlan 271

Router(config-vlan)# name outside_trunk_port_vlan

Router(config-vlan)# exit

Router(config)#

79257

WAN router

Interface VLAN 171

(192.168.100.254)

Port VLAN 271

Gigabit Ethernet 1/2

WAN interface trunk port

LAN interface

Gigabit Ethernet 1/1

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 97 98

Pas de commentaire

Cisco WS-SVC-IPSEC-1= - IPSec VPN Services Module Informations techniques Page 52