Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router Guide de l'utilisateur télécharger pdf (Page 112)

104

Wireless-N Gigabit Security Router with VPN

Appendix C: Configuring a Gateway-to-Gateway IPSec Tunnel

Configuring the VPN Settings for the VPN Routers

Configuring VPN Router 1

Follow these instructions for the first VPN Router, designated VPN Router 1. The other VPN Router is designated

VPN Router 2.

1. Launch the web browser for a networked PC, designated PC 1.

2. Enter the VPN Router’s local IP address in the Address field (default is 192.168.1.1). Then press Enter.

3. A password request page will appear. (Non-Windows XP users will see a similar screen.) Complete the User

Name and Password fields (admin is the default user name and password). Then click the OK button.

4. Click the VPN tab.

5. Click the IPSec VPN tab.

6. For the VPN Tunnel setting, select Enabled.

7. Enter a name in the Tunnel Name field.

8. For the Local Secure Group, select Subnet. Enter VPN Router 1’s local network settings in the IP Address and

Mask fields.

9. For the Remote Secure Group, select Subnet. Enter VPN Router 2’s local network settings in the IP Address

and Mask fields. Note that the subnet of Router 2 must be different than the subnet of Router 1.

10. For the Remote Secure Gateway, select IP Addr. Enter VPN Router 2’s WAN IP address in the IP Address field.

11. Click the Save Settings button.

Figure C-2: Login Screen

Figure C-3: VPN - IPsec VPN Configuration

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 133 134

Pas de commentaire

Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router Guide de l'utilisateur Page 112