Cisco Wide Area Application Engine 612 Manuel d'utilisateur télécharger pdf (Page 27)

Interception Techniques and Protocols 101

Note that the ip wccp redirect exclude in command is conﬁgured on the subinterface

connecting to the WAE. This is required because outbound redirection is used on the serial

interface connecting to the WAN. An alternative conﬁguration is shown in Example 4-17.

ip address 10.10.10.1 255.255.255.0

interface GigabitEthernet0/0.20

description ** Branch WAE VLAN **

ip address 10.10.20.1 255.255.255.0

ip wccp redirect exclude in

end

Example 4-17 Cisco IOS WCCP Conﬁguration Using Inbound Redirection

ip wccp 61

ip wccp 62

ip cef

interface Serial0/0

bandwidth 1536

no ip address

encapsulation frame-relay

interface Serial0/0.100

ip add 10.88.80.18 255.255.255.252

ip wccp 62 redirect in

frame-relay interface-dlci 100

interface GigabitEthernet0/0

no ip address

duplex auto

speed auto

interface GigabitEthernet0/0.1

description ** Branch Client VLAN **

encapsulation dot1q 10

ip address 10.10.10.1 255.255.255.0

ip wccp 61 redirect in

interface GigabitEthernet0/0.20

description ** Branch WAE VLAN **

ip address 10.10.20.1 255.255.255.0

end

Example 4-16 Complete Cisco IOS WCCP Conﬁguration (Continued)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 40 41

Pas de commentaire

Cisco Wide Area Application Engine 612 Manuel d'utilisateur Page 27