Cisco UBR7223 - uBR 7223 Modular Expansion Base Spécifications télécharger pdf (Page 54)

Installing a Port Adapter

PA-H HSSI Port Adapter Installation and Configuration7-4

Figure 7-4 Aligning the Single-Width Port Adapter Between the Slot Guides

Step 7

With the port adapter halfway in the slot, connect all required cables to the port adapter.

Step 8 After connecting all required cables, carefully slide the port adapter all the way into the

slot until the port adapter is seated in the router.

Step 9 After seating the port adapter in the router, slide the locking tab up to the locked position

and tighten the screws. (Figure 7-1 or Figure 7-2 shows the locking tab in the locked

position.)

This completes the procedure for installing a new port adapter in a Cisco 7100 series router. Proceed

to Chapter 8, “Cable Installation and Interface Conﬁguration,” for information on how to conﬁgure

your port adapter.

22132

0 /

XMTRRCVR

RCLK

FERF

AIS OOF LL

Guides

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 71 72

Pas de commentaire

Cisco UBR7223 - uBR 7223 Modular Expansion Base Spécifications Page 54