Cisco uBR7100E Series Guide d'installation télécharger pdf (Page 89)

6-13

Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide

OL-5916-01

Chapter 6 Maintenance

Upgrading the SDRAM Memory Modules

Figure 6-6 Removing the Cover

Removing the SDRAM DIMM

To remove the existing DIMM, use the following procedure:

Step 1 Make sure that you are properly grounded.

Step 2 Locate the DIMM and position the chassis so that you are facing the DIMM module you want to remove.

Step 3 Open the DIMM latches on the DIMM to release the DIMM from the socket. (See Figure 6-8) The

DIMM is under tension in the socket; therefore, the DIMM might be released from the socket with some

force.

1 Cover screws 2 Tabs

116848

Cisco uBR7100

SERIES

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 137 138

Pas de commentaire

Cisco uBR7100E Series Guide d'installation Page 89