Cisco RV082 - Small Business VPN Router Guide de l'utilisateur télécharger pdf (Page 13)

Installation

10/100 8-Port VPN Router

Chapter 3

Connect your cable or DSL modem’s Ethernet 3.

cable to the Router’s Internet port.

If you are using the DMZ/Internet port, then connect

an Ethernet cable to the DMZ/Internet port. Connect

the other end to a network device, such as a modem

or public server.

Connect to the Internet Port

Power on the cable or DSL modem. If you have a 4.

network device connected to the DMZ/Internet port,

power on the network device.

Connect the included power cord to the Router’s 5.

Power port, and then plug the power cord into an

electrical outlet.

Connect the Power

The System LED on the front panel will light up as soon 6.

as the power adapter is connected properly.

Power on your computers and other network devices.7.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 110 111

Pas de commentaire

Cisco RV082 - Small Business VPN Router Guide de l'utilisateur Page 13