Cisco NME-WAE-502-K9 - Wide Area Application Services Network Module Spécifications télécharger pdf (Page 18)

Configuring Cisco Access Routers and the NME-WAE Network Module for ACNS Deployments

OL-13140-02

service-module integrated-service-engine reload

To perform a graceful shutdown and reboot of the integrated-service-engine (ISE) network module

ACNS operating system, use the service-module integrated-service-engine reload command in

privileged EXEC mode.

service-module integrated-service-engine slot/unit reload

Syntax Description

Defaults None

Command Modes Privileged EXEC

Command History

Usage Guidelines At the confirmation prompt, press Enter to confirm the action or n to cancel.

Examples The following example gracefully shuts down and reboots the ISE network module ACNS operating

system in slot 1:

Router# service-module integrated-service-engine 1/0 reload

Do you want to proceed with reload?[confirm]

Related Commands

slot Slot number of the network module in the router chassis.

/unit Number of the daughter card on the network module. For ISE network

modules, always use 0. The slash mark (/) is required between the slot

argument and the unit argument.

Release Modification

12.4(9)T This command was introduced for ISE network modules.

Command Description

interface integrated-service-engine Configures an interface for ISE network modules and enters

interface configuration mode.

service-module

integrated-service-engine reset

Resets the hardware on ISE network modules.

service-module

integrated-service-engine

shutdown

Gracefully shuts down ISE network modules.

show diag Displays controller information for ISE network modules.

show interfaces

integrated-service-engine

Displays basic interface configuration information for ISE

network modules.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Pas de commentaire

Cisco NME-WAE-502-K9 - Wide Area Application Services Network Module Spécifications Page 18