Cisco MC3810-V - Concentrator - External Guide d'installation Page 24

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 32
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 23
22
Perform Initial Configuration (continued)
Configuring T1 Controller Settings
To configure T1 controller settings, do the following in controller configuration mode:
Configuring E1 Controller Settings
To configure E1 controller settings, perform the following tasks in controller configuration mode:
Step Command Purpose
1
Configure the cable length setting by doing one of the following:
router(config-ctrl)# cablelength
short {133 | 266 | 399 | 533 |
655}
Configure the cable length if the length is 655 feet or shorter.
router(config-ctrl)# cablelength
long {gain26 | gain36} {-15db |
-22.5db | -7.5db | 0db}
Configure the cable length if the length is longer than 655 feet.
2
router(config-ctrl)# framing
{sf | esf}
Configure the DS1 link framing format. Extended SuperFrame
format (esf) is required for ATM traffic.
3
router(config-ctrl)# linecode
{ami | b8zs}
Configure the line encodingformat for theDS1 link.The b8zssetting is
required for ATM traffic.
4
router(config-ctrl)# no shutdown
Activate the T1 controller.
5
router(config-ctrl)# exit
Exit controller configuration mode.
6
router(config)# exit
Exit configuration mode.
7
router> show controller T1 0
Verify the controller configuration.
Step Command Purpose
1
router(config-ctrl)# {framing
crc4 | no-crc4} [australia]
Configure the E1 framing format. If the trunk will be connected to a
device in Australia, enter the australia option.
2
router(config-ctrl)# linecode
{ami | hdb3}
Configure the E1 line encoding format. The hdb3 setting is required for
ATM traffic.
3
router(config-ctrl)# no shutdown
Activate the E1 controller.
4
router(config-ctrl)# exit
Exit controller configuration mode.
5
router(config)# exit
Exit configuration mode.
6
router> show controller E1 0
Verify the controller configuration.
Vue de la page 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Commentaires sur ces manuels

Pas de commentaire