Cisco LINKSYS WAG54GS (EU) Guide de l'utilisateur télécharger pdf (Page 40)

Chapter 5: Configuring the Gateway

The Applications and Gaming Tab

Wireless-G ADSL Gateway

The Applications and Gaming Tab

Single Port Forwarding

The Single Port Forwarding screen provides options for customization of port services for common applications.

(See Figure 5-26.)

When users send this type of request to your network via the Internet, the Gateway will forward those requests to

the appropriate computer. Any computer whose port is being forwarded should have its DHCP client function

disabled and should have a new static IP address assigned to it because its IP address may change when using

the DHCP function.

Choose or enter the Application in the field. Then, enter the External and Internal Port numbers in the fields.

Select the type of protocol you wish to use for each application: TCP or UDP. Enter the IP Address in the field.

Click Enabled to enable UPnP Forwarding for the chosen application.

When finished making your changes on this tab, click the Save Settings button to save these changes, or click

the Cancel Changes button to undo your changes.

Figure 5-26: Single Port Forwarding

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 94 95

Pas de commentaire

Cisco LINKSYS WAG54GS (EU) Guide de l'utilisateur Page 40