Cisco CX-FEIP-1FX= Installation and con?guration Guide de l'utilisateur télécharger pdf (Page 10)

10 Fast Ethernet Interface Processor (FEIP) Installation and Conﬁguration

Installation Prerequisites

Figure 2 Maximum Segment and Network Lengths—100BASE-FX and 100BASE-TX

What Is the Cisco 7000 Series?

The Cisco 7000 series includes the Cisco 7000 and Cisco 7010 routers. The FEIP operates in the

Cisco 7000 series routers. (For software and hardware requirements, refer to the section “Software

and Hardware Prerequisites” on page 3.)

Network interfaces reside on modular interface processors, including the FEIP, which are inserted

into interface processor slots and provide a direct connection between external networks and the

high-speed CxBus in the Cisco 7000 series. The Cisco 7000 series supports any combination of

available network interface types.

In the 7-slot Cisco 7000 (see Figure 3), slots 0 through 4 are for interface processors including the

FEIP.

Maximum segment length, full duplex

100 m TX

DTEDTE*

*DTE = Data Terminal Equipment

**Because repeaters have more delay, total network length is shorter.

2000 m FX–multimode

Maximum segment length, half duplex

100 m TX

DTEDTE

412 m FX

Maximum segment length, full duplex

10,000 m FX–single mode

DTEDTE

Maximum network length, half duplex

200 m TX

DTEDTE R

(Repeater)

272 m FX**

31703

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Pas de commentaire

Cisco CX-FEIP-1FX= Installation and con?guration Guide de l'utilisateur Page 10