12
Release Notes for Cisco IOS Release 12.0(10)W5(18b) Feature Packs for the Cisco Catalyst 8510 MSR and LightStream 1010 ATM Switch
78-10701-02
Documentation Updates
Step 10 At the prompt, enter the filename of the Cisco IOS Release 78-10701-02 image to be copied to the
Catalyst 8510 MSR and LightStream 1010, as shown in the following example:
Source file name? cat8510m-wp-mz.120-10.W5.18b.bin
This example specifies the UNIX image name of the IP feature set for Catalyst 8510 MSR and
LightStream 1010 (as shown in Table 4 in the “Feature Pack Overview Table” section on page 5).
Step 11 At the prompt, enter the destination UNIX image filename and press Enter.
This is the name of the image file on the Catalyst 8510 MSR and LightStream 1010—not the full
pathname of the image on the CD-ROM attached to the PC. Refer to Table 4 in the “Feature Pack
Overview Table” section on page 5 for the UNIX image filename.
Destination file name [cat8510m-wp-mz.120-10.W5.18b.bin]?
During the transfer process, the software displays messages indicating that it has accessed the file you
have specified and is loading it.
Step 12 At the prompt, enter yes if you want to erase the existing image copy resident in the Catalyst 8510
MSR and LightStream 1010 Flash memory before copying the new one.
Erase flash device before writing? [confirm] yes
The entire copying process takes several minutes and differs from network to network.
The exclamation point (!) indicates that the copy process is taking place. Each exclamation point (!)
indicates that ten packets have been transferred successfully. A checksum verification of the image
occurs after the image is written to Flash memory.
Step 13 Enter the reload command to reload the Catalyst 8510 MSR and LightStream 1010:
Router# reload
After the reload is complete, the Catalyst 8510 MSR and LightStream 1010 should be running the
required Cisco IOS image. Use the show version command to verify it.
Documentation Updates
An Update to the ATM Switch Router Command Reference publication was created to reflect
information added after printing the manual.
Related Documentation
The following sections describe the documentation available for the LightStream 1010 ATM switch
and Catalyst 8510 MSR. Typically, these documents consist of hardware installation guides, software
installation guides, Cisco IOS configuration and command references, system error messages, and
feature modules, which are updates to the Cisco IOS documentation. Documentation is available as
printed manuals or electronic documents, except for feature modules, which are available online only.
The most up-to-date documentation can be found on the Web via Cisco Connection Online (CCO) and
the Documentation CD-ROM. These electronic documents might contain updates and modifications
made after the hard-copy documents were printed.
(7 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels