Cisco Catalyst 4224 Manuel d'utilisateur télécharger pdf (Page 17)

WJR; Reviewed:

WCH 9/17/2003

Solution & Interoperability Test Lab Application Notes

17 of 26

ipo-callmanager.doc

4.5. Adding a Route Pattern

Step 1 From the Call Manager Main menu, select Route-->Route Pattern and then select

Add a New Route Pattern to create a route pattern for calls to IP Office.

Step 2 Set the Route Pattern to 1XXXX so this pattern applies to all calls in the 10000 to

19999 range.

• Set the Partition to be part of the IP Office-175 partition created earlier, and the

Gateway to the Gateway 192.16.200.175 created in Section 4.4.

Figure 17: Route Pattern

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Pas de commentaire

Cisco Catalyst 4224 Manuel d'utilisateur Page 17