Cisco BEFVP41 Guide de l'utilisateur télécharger pdf (Page 15)

Chapter 4: Connecting the Router

Overview

EtherFast Cable/DSL VPN Router with 4-Port 10/100 Switch

Chapter 4: Connecting the Router

Overview

To set up your network, do the following:

• Connect the Router to one of your PCs.

• If necessary, configure your PCs to obtain an IP address automatically from the Router. (By default, Windows

98, 2000, Millennium, and XP computers are set to obtain an IP address automatically, so unless you have

changed the default setting, then you will not need to configure your PCs.)

• Configure the Router with the setting(s) provided by your Internet Service Provider (ISP).

The installation technician from your ISP should have left the setup information with you after installing your

broadband connection. If not, you can call your ISP to request the information. Once you have the setup

information for your specific type of Internet connection, then you can begin installation and setup of the Router.

Figure 4-1: Example of a Typical Network

Cable or DSL

Modem

Cable/DSL Router

Notebook with

Ethernet Adapter

PC with Ethernet Adapter

adapter: a device that adds network

functionality to your PC

IP Address: the address used to identify a

computer or device on a network

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 82 83

Pas de commentaire

Cisco BEFVP41 Guide de l'utilisateur Page 15