Cisco ATA188-I1 Manuel d'utilisateur télécharger pdf (Page 17)

Caution Do not connect the Phone input ports to a

telephone wall jack. To avoid damaging the

Cisco ATA or telephone wiring in the building, do

not connect the Cisco ATA to the

telecommunications network. Connect the Phone

port to a telephone only, never to a telephone wall

jack.

Note The telephone must be switched to tone setting (not

pulse) for the Cisco ATA to operate properly.

Step 3 (Optional) Connect the telephone line cord of a second

telephone to the Phone 2 input port.

Note If you are connecting only one telephone to the

Cisco ATA, you must use the Phone 1 input port.

Step 4 Connect an Ethernet cable to the uplink RJ-45

connector on the Cisco ATA. For the Cisco ATA 186,

this is the 10BASE-T connector; for the Cisco ATA 188,

this is the 10/100UPLINK connector.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Pas de commentaire

Cisco ATA188-I1 Manuel d'utilisateur Page 17