Cisco 806 - 806 Router - EN Guide d'installation télécharger pdf (Page 9)

1-17

Cisco 806 and SOHO 71 Router Cabling and Setup

78-10354-06

Chapter 1 Cisco 806 Router and SOHO 71 Router Cabling and Setup

Connect the Power and Turn On the Router

Follow the instruction in Figure 1-5 to connect the AC adapter to the router. (Figure 1-5 shows a

Cisco 806 router, but the process is the same for a SOHO 71 router.)

Caution Be sure to use the AC adapter that was supplied with your Cisco router. AC adapters for other Cisco

routers will not plug into the power receptacle on the back panel.

Figure 1-5 Connecting the Power and Turning On the Router

The green OK LED on the front panel of the router lights when you connect the router to a power source.

The router is now ready to be used.

If the green OK LED does not turn on, refer to the “Troubleshooting the Router” chapter in the

Cisco 806 Router and SOHO 71 Router Hardware Installation Guide, available on Cisco.com.

Connect to a Website

Log into a PC connected to the router, open a web browser, and connect to a website. If you cannot access

a website, you must follow the steps in “If You Cannot Connect to a Website.” If you successfully

accessed a website, you do not need to change the configuration.

Model Cisco 806

74110

ETHERNET

TO HUB

TO PC

+5 VDC

43 2 1

10BASET COMPUTERS (E0)

ETHERNET 10BASET

INTERNET (E1)

CONSOLE

1 Cisco 806 router. 4 Desktop power supply.

2 Connect power supply cable. 5 Connect power cord to electrical outlet.

3 Connect power cord to power supply.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Cisco 806 - 806 Router - EN Guide d'installation Page 9