Cisco 7246 - uBR Router Manuel d'utilisateur télécharger pdf (Page 9)

cable downstream rate-limit

Cisco uBR7246 Universal Broadband Router Feature Enhancements 9

cable downstream rate-limit

To enable Data Over Cable Services Interface Speciﬁcation (DOCSIS) rate limiting on downstream

trafﬁc, use the cable downstream rate-limit interface conﬁguration command. Use the no form of

this command to disable DOCSIS rate-limiting on downstream trafﬁc.

cable downstream rate-limit [token-bucket | weighted-discard][exp-weight]

no cable downstream rate-limit

Syntax Description

Default

cable downstream rate-limit, which enforces strict DOCSIS-complaint rate limiting.

Command Mode

Interface conﬁguration

Command History

Usage Guidelines

When you enter this command without an option, it enables strict DOCSIS-compliant rate limiting,

which sets the burst rate to the interface speed.

Example

The following example applies the token bucket ﬁlter algorithm:

Router(config-if)# cable downstream rate-limit token-bucket

Related Commands

token-bucket

(Optional) Speciﬁes the token bucket ﬁlter algorithm.

weighted-discard

(Optional) Speciﬁes the weighted discard algorithm.

exp-weight (Optional) Speciﬁes the weight for the exponential moving

average of loss rate. Valid values are from 1 to 4.

Release Modiﬁcation

11.3(6)NA This command was ﬁrst introduced.

Command Description

cable upstream rate-limit Sets the DOCSIS rate limit for an upstream port.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 77 78

Pas de commentaire

Cisco 7246 - uBR Router Manuel d'utilisateur Page 9