Cisco 1710 Guide d'installation télécharger pdf (Page 8)

Cisco Router and Security Device Manager Quick Start Guide

78-16254-06

Task 4: Complete Cisco SDM Express

Tip If the launch page does not appear when you enter the URL http://10.10.10.1, test the connection

between the PC and the router by doing the following:

• Check that the Power LED on the router is on, and that the LED for the port to which you connected

the PC is on, indicating an active Ethernet connection between the router and the PC. If this LED is

not lit, verify that you are using a crossover cable to connect the PC to the router, or that you are

using a straight-through cable between the router and the switch.

• Verify that the web browser “work offline” option is disabled. In Internet Explorer, click the File

menu, and verify that the “work offline” option is unchecked. In Netscape, the default selection in

the File menu is set to “work online.”

• Verify that the es.tar, home.tar, home.shtml, and common.tar files are loaded into flash memory.

Open a Telnet session to 10.10.10.1, entering the username cisco and the password cisco. Enter the

show flash command to verify that these files are loaded in flash memory.

• Verify that the PC IP address is properly configured. Some routers require that the PC obtain an IP

address automatically and some require that it be configured with a static IP address. Find your

router in either Table 1 on page 3 or Table 2 on page 4 to determine how the PC should be

configured.

Task 4: Complete Cisco SDM Express

Cisco SDM Express is an SDM program that lets you quickly configure the router LAN and Internet

connections.

Step 1 When you connect to the router, the SDM Express Launch page (Figure 5) appears, followed by one or

more certificate windows. Click Yes, or click Grant to accept the certificates.

Figure 5 SDM Express Launch Page

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Pas de commentaire

Cisco 1710 Guide d'installation Page 8