Cisco 1417 - 1417 Router - EN Manuel d'utilisateur télécharger pdf (Page 12)

Connecting the Router to a PC

Cisco 1400 Series Router Installation and Configuration Guide

2-12

Connecting the Router to a PC

If you want to conﬁgure the router using Cisco IOS software, you must connect the console

port to a terminal or PC. The cable and adapters required for this connection are included

with the router.

Follow these steps, and refer to Figure 2-8 to connect the router to a terminal, terminal

server, or PC:

Step 1 Connect the blue console cable to the blue CONSOLE port on the router.

Step 2 Use the correct adapter to connect the other end of the cable to the terminal or

PC.

Note If your terminal or PC has a console port that does not ﬁt one of the adapters included

with the router, you must provide the correct adapter for that port.

Note Figure 2-8 shows a Cisco 1401 router; however, this step is the same for all

Cisco 1400 series routers.

Figure 2-8 Connecting the Console Cable to the Router

Cisco 1401

CONSOLE

ATM 25

ETHERNET

LNK

OK FLASH PC CARD

12418

Blue

console cable

To PC or terminal

1 2 ... 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Cisco 1417 - 1417 Router - EN Manuel d'utilisateur Page 12