Cisco 12012 Informations techniques télécharger pdf (Page 33)

pos framing

Cisco 12000 Series Gigabit Switch Routers 45

pos framing

To specify the framing used on the POS interface, use the pos framing interface conﬁguration

command. To return to the default SONET STS-3c framing mode, use the no form of this command.

pos framing {sdh | sonet}

no pos framing

Syntax Description

Default

SONET STS-3c framing

Command Mode

Interface conﬁguration

Usage Guidelines

This command was modiﬁed in Cisco IOS Release 11.2 GS to change the command syntax from

pos framing-sdh to pos framing and add the sonet keyword.

Example

In the following example, the interface is conﬁgured for SDH STM-1 framing:

Router(config)# interface pos 3/0

Router(config-if)# pos framing sdh

Router(config-if)# no shutdown

Router(config-if)# end

Router#

Related Commands

interface pos

sdh Selects SDH STM-1 framing. This framing mode is typically used in

Europe.

sonet Selects SONET STS-3c framing. This is the default.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 59 60

Pas de commentaire

Cisco 12012 Informations techniques Page 33