Cisco 1105 Manuel d'utilisateur télécharger pdf (Page 11)

Task 2 – VPN Tracker Configuration

After finishing task 1, you should now have a completed

→

"Configuration Checklist containing your VPN gateway’s set-

tings. We will now create a matching configuration in

VPN"Tracker.

Step 1 – Add a Connection

Open VPN Tracker, and click the plus button in the bottom left corner of the

window to add a new connection:

Step 2 – Configure the VPN Connection

Once you have added the new connection, there are a few settings that need

to be customized to match what is configured on your VPN gateway.

➊

➋

‣

VPN Gateway: Enter the WAN IP address of your VPN gateway you wrote

down as ➊ from your

→

"Configuration Checklist

‣

Local Address: Leave empty for now. Depending on your setup, you may

have to set a specific local address later. Refer to

→

"Supporting Multiple Users

on when and how to set a specific local address.

‣

Remote Networks: Enter the network address of the network that is being

accessed through the VPN tunnel ➋. Separate the subnet mask with a for-

ward slash („/“)

‣

Enter a name for the connection that will

let you recognize it later, e.g. “Office”

‣

Select Cisco / Linksys from the list of ven-

dors, then select your device

‣

Click Create to add the new connection

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Cisco 1105 Manuel d'utilisateur Page 11