Cisco 2948G-GE-TX - Catalyst Gigabit Ethernet Switch Guide d'installation télécharger pdf (Page 48)

Chapter 2 Site Planning

System Ground Connection Guidelines (Catalyst 2948G and 2980G Switches Only)

2-6

Catalyst 2984G, 2948G-GE-TX, and 2980G Switch Hardware Installation Guide

78-6286-05

Figure 2-3 Connecting System Ground on the Catalyst 2948G Switch

Figure 2-4 Connecting System Ground on the Catalyst 2980G Switch

Step 5

Remove the label that covers the grounding pad.

Step 6 Place the grounding lug against the grounding pad on the rear panel of the switch.

Step 7 Install locking washers; tighten them to secure the grounding lug to the grounding

pad.

Step 8 Insert two screws through the holes in the grounding lug and the grounding pad.

Ensure that the grounding lug and the attached wire will not interfere with other

switch hardware or rack equipment.

33112

Grounding

pad

Grounding lug

Wire

Screws

Grounding

pad

Grounding lug

Wire

Screws

33111

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 141 142

Commentaires sur ces manuels

Pas de commentaire