Cisco WS-X2932-XL Fiche technique télécharger pdf (Page 4)

Chapter 1 Overview

Key Features

1-4

Catalyst 2900 Series XL Modules Hardware Installation Guide

78-5912-03

Figure 1-1 10/100 Module

The 10/100 module is compatible with the IEEE 802.3 10BaseT standard and the

IEEE 802.3u 100BaseT standard. The ports use RJ-45 connectors and Category 5

unshielded twisted-pair (UTP) copper cabling. For connector and schematic

information, see Appendix B, “Connectors and Cables.”

100BaseFX Modules

The 100BaseFX modules have either two or four switched 100BaseFX ports for

100-Mbps fiber-optic connectivity. The ports can run in half-duplex or full-duplex

modes. The module support the IEEE 802.3u 100BaseT standard and use

standard, duplex, SC connectors. Figure 1-2 and Figure 1-3 show the 100BaseFX

modules.

Figure 1-2 2-Port 100BaseFX Modules

15676

Tighten

Screws

To Activate

Four 10/100 ports

LEDs

WS-X2914-XL-V

10BaseT/100BaseTX

15677

Two 100BaseFX ports

Tighten

Screws

To Activate

LEDs

100BaseFX

WS-X2922-XL-V

1 2 3 4 5 6 7 8 9 ... 15 16

Pas de commentaire

Cisco WS-X2932-XL Fiche technique Page 4