Cisco ADSL2MUE Guide de l'utilisateur télécharger pdf (Page 3)

Important: Make sure to only place

the microfilters between the phone

and the wall jack and not between the

Modem and the wall jack or your ADSL

will not connect.

NOTE:

A small device called a microfilter

(not included) may be necessary between

each phone and wall jack to prevent

interference. Contact your ISP if you have

any questions.

Connect the other end of the

cable to the Ethernet port on

the back of the Modem. (C2)

D Connect the power adapter to

the Modem (D1) and to the

electrical outlet (D2). Turn on

the Modem.

E Turn on your PC.

The installation of the Modem with

an Ethernet Connection is

complete. If your service provider

requires you to configure your

Modem, refer to the User Guide

(English Only) on the

CD-ROM.

1 2 3 4 5 6 7 8 ... 109 110

Pas de commentaire

Cisco ADSL2MUE Guide de l'utilisateur Page 3