Cisco WEC600N Manuel d'utilisateur télécharger pdf (Page 12)

Chapter 3

Configuration

11

Dual-Band Wireless-N ExpressCard

The Adapter connects to the network.3.

Connecting to the Network

Click 4. Print to print out your wireless network settings.

Then click Finish to return to the Status screen, or click

Exit to exit the Monitor.

Congratulations

Congratulations! The Adapter is connected to the network.

Enter the Adapter’s PIN Number

Access the web-based utility of the router. (Refer to the 1.

router’s documentation for instructions.)

On the router’s 2. Wi-Fi Protected Setup screen, enter

the Adapter’s PIN number in the PIN field. Then click

Register.

On the Adapter’s PIN number screen, click 3. Next.

Enter the PIN Number

The Adapter connects to the network.4.

Connecting to the Network

Click 5. Print to print out your wireless network settings.

Then click Finish to return to the Status screen, or click

Exit to exit the Monitor.

Congratulations

Congratulations! The Adapter is connected to the network.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Commentaires sur ces manuels

Pas de commentaire