Cisco 4-Port SSL/IPSec VPN Router RVL200 Manuel d'utilisateur télécharger pdf (Page 105)

Multiple VLANs and Subnets

4-Port SSL/IPSec VPN Router

Appendix M

Subnet Mask Select 255.255.255.0.

Range Start Enter 100.

Range End Enter 149.

For VLAN3, complete the following:

IP Address Enter 192.168.3.1. (This is the default,

which you can overwrite.)

Subnet Mask Select 255.255.255.0.

Range Start Enter 100.

Range End Enter 149.

For VLAN4, complete the following:

IP Address Enter 192.168.4.1. (This is the default,

which you can overwrite.)

Subnet Mask Select 255.255.255.0.

Range Start Enter 100.

Range End Enter 149.

Click Save Settings.

Inter-VLAN Routing Option

To allow packets to travel from one VLAN to another,

follow these instructions (optional):

Access the web-based utility of the RVL200. (Refer to

“Chapter 4: Advanced Configuration” for details.)

Click the DHCP tab.

Click the Inter-VLAN Routing tab.

Select the VLANs that can route packets to each other:

VLAN1, VLAN2, VLAN3, and/or VLAN4.

DHCP > Inter-VLAN Routing

Click Save Settings.

–

10.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 116 117

Pas de commentaire

Cisco 4-Port SSL/IPSec VPN Router RVL200 Manuel d'utilisateur Page 105