Cisco TANDBERG?150MXP Manuel d'utilisateur télécharger pdf (Page 41)

TANDBERG TANDBERG and Cisco CallManager

D13907.01

To be able to place calls from SCCP units through the TANDBERG Gateway the CallManager has to be

configured with a routing pattern that routes the call to the Gateway via the Gatekeeper, meaning the route

for the ISDN Gateway has to point at the Gatekeeper. The Gateway has to be configured with a prefix for

the H.320 service, e.g. if the prefix for dialing an outside ISDN line is 0, the gateway has to be configured

with a H.323 service prefix 0.

Configuring the TANDBERG Gateway with an H.323 service:

In the H.323 service menu:

1. Click on “Create new”.

2. Service description.

3. Service prefix.

4. Max. call bandwidth.

5. Click on “Save Changes”.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46

Pas de commentaire

Cisco TANDBERG?150MXP Manuel d'utilisateur Page 41