Cisco IOS XE Intelligent Services Spécifications Page 194

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 302
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 193
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
How to Configure EtherSwitch HWICs
82
To return to the default setting, use the bridge-group bridge-group priority number interface
configuration command.
Assigning a Path Cost
Each interface has a path cost associated with it. By convention, the path cost is 1000/data rate of the
attached LAN, in Mbps.
Follow the steps below to assign a path cost.
SUMMARY STEPS
1. enable
2. configure terminal
3. interface interface-id
4. bridge-group bridge-group path-cost cost
5. end
6. show running-config
7. copy running-config startup-config
DETAILED STEPS
Step 6
show running-config
Example:
Router: show running-config
Verifies your entry.
Step 7
copy running-config startup-config
Example:
Router# copy running-config
startup-config
(Optional) Saves your entry in the configuration file.
Command Purpose
Command Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Vue de la page 193
1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 301 302

Commentaires sur ces manuels

Pas de commentaire