Cisco 3030 Manuel d'utilisateur télécharger pdf (Page 63)

C-1

Cisco Catalyst Blade Switch 3030 Hardware Installation Guide

OL-8389-01

APPENDIX

Configuring the Switch with the CLI-Based

Setup Program

This chapter provides a quick installation and setup procedure for the switch.

Note For detailed installation procedures, see Chapter 2, “Switch Installation.” For product overview

information, see Chapter 1, “Product Overview.”

These steps describe how to do a simple installation:

1. Accessing the CLI Through the Console Port, page C-1

2. Taking Out What You Need, page C-1

3. Connecting to the Console Port, page C-2

4. Completing the Initial Configuration, page C-4

Accessing the CLI Through the Console Port

You can access the CLI on a configured or unconfigured switch by connecting the console port of the

switch to the serial port on your PC or workstation and accessing the switch through a Telnet session.

Taking Out What You Need

These items ship with your switch module:

• Console cable

• Cisco Catalyst Blade Switch 3030 Getting Started Guide

• Regulatory Compliance and Safety Information for the Cisco Catalyst Blade Switch 3030

• Registration card

Follow these steps:

1. Unpack and remove the switch module and the accessory kit from the shipping box.

2. Return the packing material to the shipping container, and save it for future use.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 71 72

Pas de commentaire

Cisco 3030 Manuel d'utilisateur Page 63