Cisco WVC54GC Guide de l'utilisateur télécharger pdf (Page 17)

Chapter 4: Connecting the Compact Wireless-G Internet Video Camera for Setup

Moving the Camera to a Different Network

Compact Wireless-G Internet Video Camera

Moving the Camera to a Different Network

When you move the Camera from a wired network to a wireless network, or vice versa, you must power off the

Camera before connecting to the new network. Proceed to the appropriate instructions.

To move the Camera from a wired network to a wireless network, follow these instructions:

1. Unplug the power adapter from the Camera.

2. Unplug the Ethernet network cable from the Camera.

3. Re-connect the power adapter to the Power port on the Camera.

The Camera’s power LED flashes while the Camera is initializing. The Camera is ready for use when the LED is

solidly lit.

Proceed to “Chapter 5: Setting up and Mounting the Compact Wireless-G Internet Video Camera.”

To move the Camera from a wireless network to a wired network, follow these instructions:

1. Unplug the power adapter from the Camera.

2. Connect the Ethernet network cable to your PC, router, or switch.

3. Connect the other end of the cable to the Ethernet port on the Camera.

4. Re-connect the power adapter to the Power port on the Camera.

The Camera’s power LED flashes while the Camera is initializing. The Camera is ready for use when the LED is

solidly lit.

Proceed to “Chapter 5: Setting up and Mounting the Compact Wireless-G Internet Video Camera.”

Downloaded from www.Manualslib.com manuals search engine

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 91 92

Pas de commentaire

Cisco WVC54GC Guide de l'utilisateur Page 17