4 Cisco UC320W Quick Start Guide
STEP 3 Connect the supplied power cord to the POWER port and to a
power outlet.
When the device is fully booted, the POWER/SYS light is steady
green.
STEP 4 Connect your PC to a LAN port on the Cisco UC320W. Do not
connect any devices to the LAN ports at this point. Your PC
will receive an IP address in the 192.168.10.x range.
NOTE:
• You may need to adjust your PC’s connecting settings to
receive an IP address dynamically.
• For best results, set the screen resolution to 1024x768 or
higher.
STEP 5 Start a web browser. In the Address bar, enter the IP address of the
Cisco UC320W (default 192.168.10.1).
STEP 6 To log in, enter the username cisco and the password cisco.
Both the username and the password are case sensitive.
STEP 7 When prompted, enter a new username and password. Neither
cisco nor admin is valid.
STEP 8 Follow the instructions in the configuration utility to connect the
equipment and configure the system.
Notes:
• If you are installing the Cisco UC320W in a network with
another DHCP server, be sure to complete the Network
Topology step in the Getting Started menu.
• For best results, enable access to Cloud Services and accept
all available firmware updates.
Power
12VDC
LAN (10/100/1000)
WAN
(10/100/1000)
2341
1234
LINE (FXO)
PHONE
(FXS)
LINE
OUT
LINE
IN
194793
UC 320W
192.168.10.x
Commentaires sur ces manuels