Cisco AS5200 Universal Access Server Overview 1-11
12-Port Modules
12-Port Modules
The access server supports the following 12-port modules:
• V.34 12-port module
• 56K 12-port module
• V.110 12-port module
In an access server with a dual T1/PRI card installed, you can install up to four 12-port
modules for a total of 48 ports. If your access server includes a dual E1/PRI card, you can
install up to five 12-port modules for a total of 60 ports. The dual E1/PRI card (see
Figure 1-4) includes an extra slot for a 12-port module, which provides you with 12 extra
ports to terminate up to 60 lines.
Note The 12-port modules are not included unless specified by your order. You can order
bundled systems that include 12-port modules or you can order the modules separately.
Refer to the section “Getting Help” in the appendix “Troubleshooting the Universal Access
Server” for ordering information.
V.34 12-Port Module
Each modem on the V.34 12-port module supports V.42bis data compression and uses the
Hayes Smartmodem AT and V.25bis command sets. The Microcom Networking Protocol
(MNP) and V.42 error-correction protocol standards provide error-free performance. The
modem offers MNP Class 10 with Adverse Channel Enhancements (ACE). MNP 10
includes:
• Multiple connection attempts during autoreliable link negotiation
• Negotiated speed upshifts
• Aggressive adaptive packet assembly
• Dynamic Transmit Level Adjustment
The V.34 module supports the following protocol and modulation standards:
• ITU-T V.42bis compression and MNP Class 5 data compression
Commentaires sur ces manuels