Cisco NMH300 Guide d'installation télécharger pdf (Page 18)

Media Hub

Mac Installation

17. Make sure the connectors on the

hard disk drive face down so they

can be seen from the bottom of

the drive bay. Also make sure the

screw holes of the hard disk drive

line up with the screw holes of

the drive bay. Then insert the hard

disk drive into the drive bay.

Click Next.

NOTE: If you are using a low-profile or half-height hard disk drive,

then use the four included screws to secure the hard disk drive in its

drive bay.

18. Position the Media Hub so you

are facing the back of the Media

Hub. With the hard disk drive’s

label facing the left side of the

Media Hub, slide the drive into

the empty slot. Push down on the

hard disk drive until it snaps into

place.

Click Next.

NOTE: If you are installing a second hard disk drive now, repeat the

previous installation steps.

19. Replace the cover, and push it

down to secure it.

Click Next.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Pas de commentaire

Cisco NMH300 Guide d'installation Page 18