© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 10
Configurable VAD with comfort noise generation
Call Connection Quality
Monitoring
RTCP, RFC1889, RFC1890, SNMP MIB for last call quality statistics
DTMF and configurable pulse dial support
RFC2833 including fast (40mS) DTMF Relay for alarm system signaling compatibility
Layer 2 Quality of Service
Full EuroPacketCable secure DQOS with GateID including UGS and UGS/AD
DQOS Lite support including UGS and UGS/AD
Layer 3 Quality of Service
Configurable DiffServe/TOS support for Signaling, RTP, and RTCP flows
Payload Header
Suppression (PHS)
Supported for RTP and RTCP packet flows to reduce per-call network bandwidth.
Advanced support for Dynamic Payload Header Suppression using Propane Technology.
SNMPv3, SNMPv2, Telnet with configurable user ID and password, internal log, and external
Syslog support
G.168 with extended echo tail support
Caller ID
Call Waiting with Caller ID
Cancel Call Waiting
Call Conferencing (3-way calls)
Configurable hook flash support
Distinctive Ringing (Configurable for up to 11 ring patterns per phone line)
Ring splash
Stutter dial tone
Off hook warning tone
Open Switch Interval support to enhance answering machine compatibility
Configurable star codes
Euro/US hook-flash type
Call transfer
Message Waiting Indicator
Warm Line
Call Forwarding Unconditional
Call Forwarding on Busy
Call Forwarding No Answer
Call return
Redial Call
Automatic redial
Other call features available with compliant CMS or gateway
Full 5 REN support on each phone line (10 REN total)
Configurable balanced ring with configurable DC offset
Supports up to 1000 ft of AWG26 wire (0.4 mm) on each phone line. Supports operation with
typical in-home telephone wiring
Country-Specific
Telephone Parameters
Supported
United States, Japan, United Kingdom, Germany, France, Belgium, Netherlands, Finland, Italy,
Switzerland, Sweden, Denmark, Brazil, ETSI 101 909-18
Bridged Ethernet and USB data ports
Cable Modem Access
Protection
Software based standby feature disables bridging to the WAN when enabled
Configurable up to 64 CPE devices (1 USB and 63 Ethernet)
41.4 Mbps for 64 QAM and 55.2 Mbps for 256 QAM, 8 MHz channel
Commentaires sur ces manuels