Cisco 815 Spécifications télécharger pdf (Page 16)

Warning

Do not work on the system or connect or disconnect cables during periods of lightning activity.

Statement 1001

Warning

Read the installation instructions before connecting the system to the power source.

Statement 1004

Note The installation must comply with all required electrical codes applicable at the installation site.

Cable Connections

Warning

Hazardous network voltages are present in WAN ports regardless of whether power to the router is OFF or ON. To

avoid electric shock, use caution when working near WAN ports. When detaching cables, detach the end away

from the router first.

Statement 1026

Note One or two Ethernet cables are typically provided with the Cisco 815 integrated services router. Additional cables and

transceivers can be ordered from Cisco. For ordering information, contact customer service. For cable pinouts, see the

Cisco Modular Access Router Cable Specifications document.

Connecting the Router Console Port to a Terminal or PC

Follow these steps to connect the router to a terminal or PC:

Step 1 This step is required only if you want to use the Cisco IOS CLI to configure or troubleshoot the router. To use the

Cisco IOS software, you must connect the router to a terminal or to a PC with terminal emulation software. Terminal

emulation software should be configured with the following settings:

• 9600 bps

• 8data bits

• No parity bits

• 1 stop bit

Step 2 Connect the RJ-45 end of the console cable to the CONSOLE port on the back panel of the router, as shown in Figure 7.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Pas de commentaire

Cisco 815 Spécifications Page 16