Cisco 30 VIP Spécifications télécharger pdf (Page 12)

12 VIP-FE-TX Installation and Conﬁguration

Versatile Interface Processor Functions

VIP Installation Prerequisites

This section provides a list of parts and tools you will need to perform the installation, and it also

includes safety and ESD-prevention guidelines to help you avoid injury and damage to the

equipment. This section also provides a detailed description of the OIR function to help you perform

online installation successfully and avoid error message and system restarts. If you are installing a

new VIP, be sure to review the equipment descriptions and distance limitations in the section

“FE-TX Port Adapter Receptacles, Cables, and Pinouts” on page 33 when preparing your site and

planning network connections.

List of Parts and Tools

You need the following tools and parts to install a VIP. If you need additional equipment, contact a

service representative for ordering information.

• Cables appropriate for the port adapter interfaces on your VIP

• Number 1 Phillips and a 3/16-inch, ﬂat-blade screwdriver

• Your own ESD-prevention equipment or the disposable grounding wrist strap included with all

upgrade kits, FRUs, and spares

Safety Guidelines

Following are safety guidelines that you should follow when working with any equipment that

connects to electrical power or telephone wiring.

Electrical Equipment Guidelines

Follow these basic guidelines when working with any electrical equipment:

• Before beginning any procedures requiring access to the chassis interior, locate the emergency

power-off switch for the room in which you are working.

• Disconnect all power and external cables before moving a chassis.

• Do not work alone when potentially hazardous conditions exist.

• Never assume that power has been disconnected from a circuit; always check.

• Do not perform any action that creates a potential hazard to people or makes the equipment

unsafe.

• Carefully examine your work area for possible hazards such as moist ﬂoors, ungrounded power

extension cables, and missing safety grounds.

Telephone Wiring Guidelines

Use the following guidelines when working with any equipment that is connected to telephone

wiring or to other network cabling:

• Never install telephone wiring during a lightning storm.

• Never install telephone jacks in wet locations unless the jack is speciﬁcally designed for wet

locations.

• Never touch uninsulated telephone wires or terminals unless the telephone line has been

disconnected at the network interface.

• Use caution when installing or modifying telephone lines.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Pas de commentaire

Cisco 30 VIP Spécifications Page 12